A Perfect Solution
The DXA250.4 Four-Channel Amplifier is a perfect solution for all of your door speakers, or a bumpin’ three-way system for a two seater.
Use FIT™ (Fail-Safe Integration Technology) to install this amp in any ride – with or without a factory radio. For even more bass, use KickEQ™ for up to 12dB of extra bump!
This DX amplifier delivers as much as 60 watts per channel (4 channels driven), or 125 watts into two sets of bridged channels. See below for more details.
|RMS Power [Watts]|
|@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 30 x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N : 60 x 4
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 125 x 2
|Length [in, cm]|
|Height [in, cm]|
|Width [in, cm]|
|Frequency Response [Hz]|
|Signal-to-Noise Ratio [dB]|
|>95, A-weighted, re: rated power|
|Low Level: 125mV–5V
High Level: 250mV–10V
|HI, LO or OFF; Variable 50–200Hz @ 12dB/Octave|
|KickEQ™ Bass Boost|
|Variable 0–12dB @ 40Hz|