ZX-Series Amplifiers provide the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound. Two-channel, four-channel, a five-channel hybrid and absurd monoblock amps round out a hard-working, noise-free lineup with heat sinks that can be personalized with edgy vinyl skins.
All KICKER ZX Amplifiers now feature FIT™, or Fail-Safe Integration Technology. Alternators, computers and audio/video entertainment result in additional noise pulsing through today's vehicles. FIT utilizes isolated differential inputs, rejecting noise and electrical interference for the quietest operation possible and ultimate audio clarity. FIT comes standard on ALL KICKER ZX Amplifiers.
Seven ZX.1 Mono-Channel Subwoofer Amplifiers give the user a bevy of energy-saving, Class-D* power choices for supplying bass needs. From 300 watts up to a ridiculous 2,500-plus watts (all listed ratings 2 Ohm at 14.4V), KICKER makes selections available for what it does best… bass. Hiding under an efficient chassis, ZX Sub Amps offer a 24dB/octave low-pass electronic crossover and a 24dB/octave, high-pass subsonic filter fixed at 25 hertz. All have up to +18dB of boost centered at 40 hertz, and all provide an outlet for the KICKER ZXRC remote bass control for that extra bit of bass at the driver's fingertips (the four most powerful amps include the ZXRC remote with purchase).
Differential inputs also make KICKER amps compatible with any factory or aftermarket radio. A muting circuit cancels out additional noise that may surge down the line, so listeners enjoy the cleanest, clearest sound possible. Additionally, a choice of three automatic turn-on modes (remote, DC offset, signal sense) provide ultimate flexibility. Gain and crossover frequencies are top-mounted for easy access to fine tuning.
ZX-Series Multi-Channel Amplifiers put the choice of system installation in the listener's hands. Power in the three models ranges from 90 watts x 4 channels up to 160 watts x 4, giving the user plenty of system decisions to make. The full-range channels' 12dB/octave high-, low-, or all-pass electronic crossover is variable from 50 to 200 hertz with the +18dB of boost centered at 40 hertz. The popular ZX700.5 hybrid model features a sub-rattling, 420-watt Class-D channel to go along with 85 watts x 4, running an entire audio system from a single amplifier.
Two ZX.2 Stereo Amplifiers offer the same bundle of features that designate them unbeatable, including the +18dB of bass boost. The three most powerful multi-channel and stereo amps provide an outlet for the KICKER ZXRC remote bass control (ZXRC sold separately). Optional endcaps are available for all ZX amplifier models. Amp chassis skins for personalizing any install can be ordered at www.kicker.com.
While KICKER amps are always covered by a two-year factory warranty, KICKER will provide an additional one-year extended warranty with the purchase of any KICKER installation kit at the time of the amplifier purchase. Consumers should contact any Authorized KICKER Dealer or log onto www.kicker.com for more information.
| Model | ZX2500.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 2500 @ 2 Ohms |
| Remote Bass Control | Yes |
| Length (in., cm) | 27/1/2, 69.7 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZXS1500.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 1500 @ 2 Ohms |
| Remote Bass Control | Yes |
| Length (in., cm) | 13-5/8, 34.5 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX1000.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 1000 @ 2 Ohms |
| Remote Bass Control | Yes |
| Length (in., cm) | 13-5/8, 34.5 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX750.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 750 @ 2 Ohms |
| Remote Bass Control | Yes |
| Length (in., cm) | 14-11/16, 37.3 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX500.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 500 @ 2 Ohms |
| Remote Bass Control | No |
| ZXRC Remote Bass capable (sold sep.) | Yes |
| Length (in., cm) | 12", 30.5 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX400.1 |
|
|
|
| Class | D |
| Power (watts) Mono | 400 @ 2 Ohms |
| Remote Bass Control | No |
| ZXRC Remote Bass capable (sold sep.) | Yes |
| Length (in., cm) | 10-1/4, 26 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX300.1 |
|
|
|
| Class | A/B |
| Power (watts) Mono | 300 @ 2 Ohms |
| Remote Bass Control | No |
| ZXRC Remote Bass capable (sold sep.) | Yes |
| Length (in., cm) | 13-1/2, 34.2 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only
24dB/octave high-pass subsonic filter fixed @ 25Hz
KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX450.2 |
|
|
|
| Power (watts/channel) 2 Ohm Stereo | 225 x 2 |
| Power (watts/channel) 4 Ohm Bridged Mono | 450 |
| ZXRC Remote Bass Control capable (sold sep.) | Yes |
| Length (in.,cm) | 16-3/4, 42.5 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz selectable high pass, low pass, or all pass
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX200.2 |
|
|
|
| Power (watts/channel) 2 Ohm Stereo | 100 x 2 |
| Power (watts/channel) 4 Ohm Bridged Mono | 200 |
| ZXRC Remote Bass Control capable (sold sep.) | No |
| Length (in., cm) | 10-1/4, 26 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz selectable high pass, low pass, or all pass
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX650.4 |
|
|
|
| Power (watts/channel) 2 Ohm Stereo | 160 x 4 |
| Power (watts/channel) 4 Ohm Bridged Mono | 320 x 2 |
| Class D Power (watts) 2 Ohm Mono | - |
| ZXRC Remote Bass Control capable (sold sep.) | Yes |
| Length (in., cm) | 20, 50.7 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 20Hz-20kHz (ZX700.5 25Hz-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
(ZX700.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50Hz-200Hz, low pass only)
ZX700.5 only - 24dB/octave, sub channel high-pass subsonic filter fixed at 25Hz
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz (ZX700.5 boost sub channel only)
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX350.4 |
|
|
|
| Power (watts/channel) 2 Ohm Stereo | 90 x 4 |
| Power (watts/channel) 4 Ohm Bridged Mono | 175 x 2 |
| Class D Power (watts) 2 Ohm Mono | - |
| ZXRC Remote Bass Control capable (sold sep.) | No |
| Length (in., cm) | 13-1/2, 34.2 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 20Hz-20kHz (ZX700.5 25Hz-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
(ZX700.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50Hz-200Hz, low pass only)
ZX700.5 only - 24dB/octave, sub channel high-pass subsonic filter fixed at 25Hz
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz (ZX700.5 boost sub channel only)
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | ZX700.5 |
|
|
|
| Power (watts/channel) 2 Ohm Stereo | 85 x 4 |
| Power (watts/channel) 4 Ohm Bridged Mono | 165 x 2 |
| Class D Power (watts) 2 Ohm Mono | 420 |
| ZXRC Remote Bass Control capable (sold sep.) | Yes |
| Length (in., cm) | 20, 50.7 |
Common to all Models
Height: 2-1/8", 5.4cm
Width: 9-5/8", 24.4cm
Frequency Response: 20Hz-20kHz (ZX700.5 25Hz-20kHz), +0/-1dB
Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V
Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass
(ZX700.5 12dB/octave, full-range channels variable 50Hz-200Hz, selectable high or all pass; 24dB/octave, sub channel variable 50Hz-200Hz, low pass only)
ZX700.5 only - 24dB/octave, sub channel high-pass subsonic filter fixed at 25Hz
KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz (ZX700.5 boost sub channel only)
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
- High-Efficiency Class-D Design in most monoblock amps
- Innovative boost converter power supply in ZXS Amps for the highest sound quality and super efficiency, nearly 90 percent
- KickEQ™ Boost with variable gain up to 18dB centered at 40Hz
- Active 50-200Hz variable 12dB/octave XOVER with selectable HiPass, LoPass, or AllPass capability on full-range channels
- Active 50-200Hz variable 24dB/octave LoPass XOVER on mono channels
- Automatic turn-on options include: 12 volt remote turn-on, DC offset, and audio signal sensing
- Differential Hi- and Lo-Level Inputs for integration in any system
- Advanced protection circuitry: low/high voltage, over-current, and thermal protection with indication on end panel
- All feature FIT™ Fail-Safe Integration Technology with advanced input design
- FIT accepts output from virtually any source unit – factory or aftermarket – low signal-level to high speaker-level
- FIT's isolated inputs reject electrical interference for noise-free operation
- FIT's three turn-on modes interface with virtually any vehicle's electrical system (check for different specs on ZX300.1 and ZX700.5 amps)
*The ZX300.1 is KICKER’s only Class A/B subwoofer amplifier, and has different features
Comments
Kicker Zx750.1 Amp
This amp has incredible power!! I have it hooked up to 2 12' Kicker CVR's.. The amp is only turned up halfway with just a tiny bit of bass boost, and it absolutely pounds!!! Very satisfied with this amp and I highly encourage the purchase of any zx amplifier!!
ZX750.1
I have used Fosgate, Hifonics and I love them BUT I finally bout a pair of the zx750.1 amps and I was blown away, so crisp and clean sounding bass, so much power thrown to each of my L7s and they don't even phase my electrical system, I only buy kicker subs and from now on I'll only buy kicker amps you can't beat this brand of products and the price makes it easy for anyone to afford. So yeah you best believe I'm living loud with kicker!!
kickers are the shit i trust
kickers are the shit i trust this band
Tengo una ZX 700.5 con unos
Tengo una ZX 700.5 con unos ovalados KS tres vias y un bajo Solobaric 10 L5 suena excelente !!!! con un cajon spl según las especificaciones kicker
zx2500
Since I've started driving 6 years ago, I've had an amplified system in everyone of my vehicles. I've gonna through countless numbers of amps over the years and finally spent good money on a very powerful amp. I am very glad I did and should have done this along time ago. This amp has true power and will put any other amp to shame for its price. Your subwoofers will be begging you to turn it down when you hook this monster to it! The zx2500 is the second best amp next to the warhorse! I'm very satisfied and if you want a lot of true loud bass then get a zx and live loud!
ZX Amps
I recently installed two Kicker ZX amps in a COMPLETE Kicker install, and I can't believe how good they sound! Check out the build log here:
http://www.stevemeadedesigns.com/board/topic/103401-kickin-cruiser-stage-2/
or this video here:
http://www.youtube.com/watch?v=4o8_CTo5RL4
Kicker ftw!
i got the 400.1 and it does the job forsure! All i need to power my single 12" cvr.
Kicker Zx 650.4
I have a 650.5 Amp with 4 Kicker comps and i have the hardest hitting system in my town!!!!!!! I love my kicker system it is the best i give it a 5 out of 5!!!!!
Underated
I have a ZX1500.1 Slappin' my 2 cvx 12's. I've had many amps from kenwood, Hifonics, pioneer, sony, etc. No other amp has performed like the ZX. Currently working on making all other components of my sound system Kicker. I Know my amp is putting out more than it's rated. Anyone thinking of getting one of these should. Sell any other amp you have & get one of these. Have these in my Jeep & I can turn it up to make sure people hear me coming. Making all mirrors worthless. ZX amplifiers, Get one!
L 7
The best sub i ever used