DX AMPLIFIERS
Strictly Relentless, Reliable Power
A pair of DX.1 Mono-Channel Subwoofer Amplifiers supply all the necessary features expected from high-power, monoblock amplifiers that pulverize subwoofers with energy-saving, Class D power, including the ability to be stable under loads as low as one Ohm. DX Sub Amps are rated at 1,000 watts or 500 watts (1 Ohm at 14.4V), offering an 18dB/octave low-pass electronic crossover variable from 50 to 200 hertz. It also includes an 18dB/octave, high-pass subsonic filter variable from 10 to 30 hertz. They provide +9dB (or 0dB) of bass boost centered at 40 hertz, and include the convenient, mountable ZXRC remote for bass control from the dash.
All KICKER Amplifier models use balanced differential inputs, making them compatible with any factory radio and eliminating unwanted noise within the audio system. A muting circuit cancels out additional noise that may surge down the line, so listeners enjoy the cleanest, clearest sound possible. Additionally, a choice of three automatic turn-on modes (remote, DC offset, signal sense) provide ultimate flexibility.
The DX200.4 Four-Channel Amplifier gives the listener multiple channels for a choice of installation configurations. It provides 50 watts x 4 channels (2 Ohms at 14.4V), and an internal, 18dB/octave all-pass, fixed 100Hz high-pass, or fixed 80Hz low-pass electronic crossover with +9dB (or 0dB) of boost centered at 40 hertz.
Two DX.2 Stereo Amplifiers offer the same outstanding features with 2-Ohm power at 50 watts/ch. or 150 watts/ch. (at 14.4V).
While KICKER amps are always covered by a two-year factory warranty, KICKER will provide an additional one-year extended warranty with the purchase of a qualifying KICKER installation kit at the time of the amplifier purchase. Consumers should contact any Authorized KICKER Dealer or log onto www.kicker.com for more information.
| Model | DX1000.1 |
|
|
|
| RMS Power in Watts, all channels driven @14.4 Volts, 4Ω mono, ≤ 1% THD+N | 280 |
| @ 2Ω mono, ≤ 1% THD+N | 550 |
| @ 1Ω mono, ≤ 1% THD+N | 1000 |
| Length: in(cm) | 10-3/8 (26.3) |
| Height: in(mm) | 2-3/16 (55) |
| Width: in(mm) | 8-5/16 (211) |
| Frequency Response, ± 1 db: | 20Hz-200Hz |
| Signal-to-Noise Ratio: | 95 dB, a weighted, re: rated power |
| Input Sensitivity: | Low Level 125mV-5V, High Level 250mV-10V |
| Electronic Crossover: | Variable Low-Pass, 50Hz-200Hz, 18dB/octave |
| Remote Bass Capable: | Yes (included) |
| Subsonic Filter: | Variable High-Pass, 10Hz-30Hz, 18dB/octave |
| Bass Boost: | Selectable 0 or +9dB Bass Boost @ 40Hz |
| Fuse, ampere | 100 |
| Power-Ground Wire, GA | 4 |
| CEA-2006 (Watts) @ 4 ohms, 14.4Vdc, 1% THD | 280 x 1 |
| CEA-2006 Signal to Noise Ratio (ref: 1W, A-weighted) | 75dB |
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | DX500.1 |
|
|
|
| RMS Power in Watts, all channels driven @14.4 Volts, 4Ω mono, ≤ 1% THD+N | 140 |
| @ 2Ω mono, ≤ 1% THD+N | 275 |
| @ 1Ω mono, ≤ 1% THD+N | 500 |
| Length: in(cm) | 10-3/8 (26.3) |
| Height: in(mm) | 2-3/16 (55) |
| Width: in(mm) | 8-5/16 (211) |
| Frequency Response, ± 1 db: | 20Hz-200Hz |
| Signal-to-Noise Ratio: | 95 dB, a weighted, re: rated power |
| Input Sensitivity: | Low Level 125mV-5V, High Level 250mV-10V |
| Electronic Crossover: | Variable Low-Pass, 50Hz-200Hz, 18dB/octave |
| Remote Bass Capable: | Yes (included) |
| Subsonic Filter: | Variable High-Pass, 10Hz-30Hz, 18dB/octave |
| Bass Boost: | Selectable 0 or +9dB Bass Boost @ 40Hz |
| Fuse, ampere | 60 |
| Power-Ground Wire, GA | 4 |
| CEA-2006 (Watts) @ 4 ohms, 14.4Vdc, 1% THD | 140 x 1 |
| CEA-2006 Signal to Noise Ratio (ref: 1W, A-weighted) | 75dB |
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | DX200.4 |
|
|
|
| RMS Power in Watts, all channels driven @14.4 Volts, 4Ω stereo, ≤ 1% THD+N |
25 x 4 |
| @ 2Ω stereo, ≤ 1% THD+N | 50 x 4 |
| @ 4Ω mono, ≤ 1% THD+N | 100 x 2 |
| Length: in (cm) | 10 1/4 (26) |
| Height: in (mm) | 2 1/8 (54mm) |
| Width: in (mm) | 8 5/16 (211mm) |
| Frequency Response, ± 1 db: | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio: | >95db, a-weighted, re: rated power |
| Input Sensitivity: | Low Level: 125mV-5V High Level 250mV-10V |
| Selectable Electronic Crossover: | 18 db/Octave High Pass Fixed @ 100Hz 18 db/Octave Low Pass Fixed @ 80Hz |
| Bass Boost: | 9db Bass Boost Switch Fixed @ 40Hz |
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | DX300.2 |
|
|
|
| RMS Power in Watts, all channels driven @14.4 Volts, 4Ω stereo, ≤ 1% THD+N |
75 x 2 |
| @ 2Ω stereo, ≤ 1% THD+N | 150 x 2 |
| @ 4Ω mono, ≤ 1% THD+N | 300 x 1 |
| Length: in (cm) | 15 (38.1) |
| Height: in (mm) | 2 1/8 (54mm) |
| Width: in (mm) | 8 5/16 (211mm) |
| Frequency Response, ± 1 db: | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio: | >95db, a-weighted, re: rated power |
| Input Sensitivity: | Low Level: 125mV-5V High Level 250mV-10V |
| Selectable Electronic Crossover: | 18 db/Octave High Pass Fixed @ 100Hz 18 db/Octave Low Pass Fixed @ 80Hz |
| Bass Boost: | 9db Bass Boost Switch Fixed @ 40Hz |
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
| Model | DX100.2 |
|
|
|
| RMS Power in Watts, all channels driven @14.4 Volts, 4Ω stereo, ≤ 1% THD+N |
25 x 2 |
| @ 2Ω stereo, ≤ 1% THD+N | 50 x 2 |
| @ 4Ω mono, ≤ 1% THD+N | 100 |
| Length: in (cm) | 8 3/8 (21.3) |
| Height: in (mm) | 2 1/8 (54mm) |
| Width: in (mm) | 8 5/16 (211mm) |
| Frequency Response, ± 1 db: | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio: | >95db, a-weighted, re: rated power |
| Input Sensitivity: | Low Level: 125mV-5V High Level 250mV-10V |
| Selectable Electronic Crossover: | 18 db/Octave High Pass Fixed @ 100Hz 18 db/Octave Low Pass Fixed @ 80Hz |
| Bass Boost: | 9db Bass Boost Switch Fixed @ 40Hz |
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
- Strictly relentless, reliable power for any car audio or multimedia system
- Two-, four-, and mono-channel amps for bass available
- Balanced differential inputs for noise elimination and factory-radio compatibility
- 3 automatic turn-on modes
- +9dB (or 0dB) of boost centered at 40 hertz
- DX.1 sub amps have 18dB/octave, high-pass subsonic filter variable from 10 to 30 hertz
- Mountable remote bass control with DX.1 sub amps for convenient boost
- KICKER Amp’s actual power always exceeds its rated power, documented inside each carton
- Additional one-year extended warranty with the purchase of a qualifying KICKER install kit
| Four-Channel | |
|---|---|
| Model | MSRP |
| DX200.4 | $199.95 |
| Mono | |
|---|---|
| Model | MSRP |
| DX500.1 | $349.95 |
| DX1000.1 | $449.95 |
| Stereo | |
|---|---|
| Model | MSRP |
| DX100.2 | $149.95 |
| DX300.2 | $199.95 |
Comments
PURCHASE A DX1000 WHAT A AMP
PURCHASE A DX1000 WHAT A AMP TOTALLY WOKE MY SYSTEM UP
Awesome....
As a car audio retailer, I can honestly say that Kicker is top of the mountain! Beast freakin amps ever!