KX200.2 Amplifier
KICKER® KX amplifiers are as diverse as they are powerful. Five mono amplifiers and a trio of multichannel amps put thousands of thunderous watts at your fingertips.

KX200.2 Amplifier

The KX 200.2 Stereo Amplifier is built for big sound in a small, powerful package.


Using powerful Class D technology, this amp features FIT™ (Fail-Safe Integration Technology) – giving you superior power, clarity and dependability. An enormous 18dB of variable bass boost with KickEQ™ lets you get as much as an 18dB of extra bump with a simple turn of the knob. A powerful 24dB DSP (digital signal processor) controlled crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full range RCA outputs to run another KX amplifier off of the same signal.


This KX amplifier delivers as much as 100 watts per channel (stereo) or 200 watts into one channel (mono). See below for more details.

KX200.2 Specifications
RMS Power [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 50 x 2
@ 14.4V, 2Ω stereo, ≤ 1% THD+N : 100 x 2
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 200 x 1
Length [in, cm]
8, 20.4
Height [in, cm]
2-1/8, 5.5
Width [in, cm]
8-5/16, 21
Frequency Response ± 1dB
10Hz - 20kHz
Signal-to-Noise Ratio
>95dB, A-weighted, re: rated power
Input Sensitivity
Low Level: 125mV–5V
High Level: 250mV–10V
Electronic Crossover
Variable HP, 10-500Hz
Variable LP, 40-500Hz; 400Hz–5,000Hz with 10X Switch (BP capable)
Slope: 24dB/octave
Bass Boost
0-18dB @ 40Hz
KX Amplifier Support


2013 KX Stereo Amplifier | Multilingual | Download

Contact Support

Technical Support
(405) 624-8583
8am - 5pm CST

Warranty Support
(405) 624-8510
8am - 5pm CST