KXM1200.1 Amplifier
Price:
KXM Amps were built for the outdoors. Power, speaker and input connections are gasket-sealed, as is the control cover hiding the settings, creating a water-resistant barrier to key components.

KXM Amplifiers

KICKER® takes proven technologies and advanced components to the water with KXM-Series Marine Amplifiers. Based on the critically acclaimed KX-Series Amplifier line for cars and trucks, weather-resistant KXM Amps utilize class-leading features specific for unbelievable sound in the boating environment, and within the most compact chassis for installing in tight locations.

Built for the Outdoors

KXM Amps were built for the outdoors. Power, speaker and input connections are gasket-sealed, as is the control cover hiding the settings, creating a water-resistant barrier to key components. The internal circuit board is sprayed with a moisture-deterring conformal coating for water and dirt resistance. The amplifier's power connections meet marine-industry standards for protection against the elements. Stainless-steel mounting hardware prevents rust stains on carpeting and gel coat, and the UV-treated chassis finish battles harsh sunlight.

Smaller Footprint

KXM Amplifiers set the curve for smaller chassis footprints, with the largest model measuring at only 12-3/4 inches long. KICKER amps feature an optimized circuit layout for the most efficient use of components, the smallest footprint and clearest sound quality. All three models use balanced differential inputs, making them compatible with any factory radio and eliminating unwanted noise so listeners enjoy the cleanest, clearest sound possible.

Member in Good Standing

KICKER is a member of the American Boat & Yacht Council (ABYC), a leader in marine-industry education, and the National Marine Manufacturers Association (NMMA), which supports the U.S. recreational boating industry.

KXM1200.1 Specifications
Continuous RMS Power [watts/channel] @ 14.4V, 2-Ohm mono
1200x1
Remote Bass Control (included)
Yes
Dimensions:
2-1/8 H x 8-5/16 W x 9-9/16 L (in.)
5.5 H x 21.0 W x 24.4 L (mm)
Frequency Response (Hz):
10-160 ±1dB
Signal-to-Noise Ratio
>95dB, A-weighted, re: rated power
Active Crossover:
24dB/octave, variable 40-160Hz, low pass only;
Input Sensitivity
high level 250mV-10V,low level 125mV-5V
KickEQ™ Boost:
variable to +18dB, centered 20-80Hz, variable Q 1-5
Subsonic Filter
24dB/octave, high-pass variable 10-80Hz
KXM Amplifier Support

Manuals


Check for your manual here | Manuals

Contact Support


Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com

Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com