DCompS10 2 Ohm
High-performance CompS™ Loaded Enclosures are factory-tuned and vented for loud, great-sounding bass ready to install into a vehicle.

DCompS10 2 Ohm

The CompS Dual 10-Inch Subwoofer Enclosure comes loaded with a single 2Ω terminal.


The CompS Enclosures are made from thick MDF and custom-sized to optimize subwoofer performance. Two-toned carpet and KICKER embroidery make this sub box a perfect choice for a quick install that sounds great.


The CompS Dual 10-Inch Enclosure works best with 600 watts of recommended power. See below for more details.

DCompS10 Specifications
Dual Subwoofers (in, cm)
(2) 10, 25
Impedance (Ohms)
Power Watts (peak/RMS)
Sensitivity (dB 1w/1m)
Box Top Depth (in, cm)
13-7/16, 34.1
Box Bottom Depth (in, cm)
16-3/8, 41.6
Box Height (in, cm)
14, 35.6
Box Width (in, cm)
28, 71.1
Recommended Amplifiers!
CX600.1- this mono amp delivers 600Watts RMS, and 1,200Watts, Peak power.

*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.

**Port Volume Excluded.

Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.

CompS Loaded Enclosure Support


2013 CompS Enclosure | Multilingual | download

Contact Support

Technical Support
(405) 624-8583
8am - 5pm CST

Warranty Support
(405) 624-8510
8am - 5pm CST