CarParts.com
Car Toys
CKR's Kicker Store
Crutchfield's KICKER store
Drive-In Autosound
Electronics Express KICKER store
Fry's Electronics
HiFiSoundConnection.com
Ikesound.com's Kicker Store
JC Whitney
Sonic Electronix Kicker Store
stylintrucks
www.ubid.com
VM Innovations
Wireless World
Login or Register to rate/review this product
Product Comments
Personal, Ithink that the Kickers l7 are the way to go. It has the best bass i ever heard. I got 2 10inch L7 in my 08 chevy silverado and they sound cool.
I just installed four KS350's and four KS680's in my 1959 Ford F-100 Panel Truck, one of each in each corner of the vehicle front and rear...awesome, clean sound! I can finally hear my music while going down the freeway with the windows down. Can't wait for the custom sub cabinets to get built and install them too!
putting two sets of these in my jeep pushed by the 350.4 sounds way better than the JL speakers, JL's sound like tin. These are smooth and clear.
Can't say enough good things about the Kicker speakers. I have these amped. They are extremely clear.
these things have really good vocals mids and highs. i have them on the 08zx350.4 and they sound really good.
Directional installation makes a significant difference in a car’s audio entertainment, but the cost of high-end components tends to factor in the decision to settle for less.
Why settle? Kick factory sound to the curb with KS-Series Component Systems. They provide smooth, clear mids and highs expected from the leader in mobile audio, and at a price that won’t lighten the wallet.
Three sizes of KS Systems offer ultimate flexibility by providing multiple installation options for the end-user. Desiring a conventional component system setup? KICKER Systems offer the kind of high-end directional sound sought by audiophiles. Want a drop-in coaxial upgrade for the doors? Simply remove the bullet-phase plugs in the woofers’ center and screw in the tweeters for a simple, quick solution to coaxial sound and audio realism.
The woofers and one-inch, aluminum-domed tweeters are brought together by a symmetrical 12dB/octave high-pass-12dB/octave low-pass crossover/protection network that is second to none, featuring a 3-position tweeter attenuation switch for fine-tuning fickle high frequencies. The finishing touch is added by the latest cosmetics, featuring a metallic finish, a new grille, and spade wire terminals that allow for easy wiring access.
KS-Series Coaxials and 3-Way SystemsDoes a serious factory upgrade, with more muscle at an affordable price, sound too good to be true? What it sounds like are some of the loudest, clearest coaxials ever hidden behind a door on under a back deck. And KICKER takes full responsibility.
Give factory sound a serious power injection with a KS-Series Coaxial Speaker upgrade. With added improvements on the woofers and tweaked tweeters, dropping them in where factory speakers were seems like a no-brainer. The curvilinear, gray woofer cones, Santoprene® surround, and newly designed basket give KS Coaxials the extra brawn to deliver a smooth, rich sound at any volume.
The half- and three-quarter-inch, Kaladex-domed tweeters contain a stout neodymium magnet dipped in ferrofluid for maximum coolness, recreating highs that rival live performance.
KS Coaxes are available in 10 sizes, from the capable 3.5-inch up to the marine-ready 6 x 9. The line includes a 6 x 8 for special applications. If you’re looking for more from your doors, there’s also a KS6930 3-way system in the lineup with an additional one-inch midrange.
KS-Series TweetersGot the bass, but lacking the clarity and definition of a high-performance tweeter? Muddy audio has long been a symptom of weak systems. The simple cure is a pair of high-performance KS-Series Tweeters.
KICKER’s louder, clearer KS-Series Tweeters provide a full range of size choices to boost your high-end and add live-performance realism. An 18dB/octave high-pass crossover accompanies the one-inch KS25, and a 12dB/octave crossover works with the three-quarter-inch KS20 and half-inch KS13.
Thanks to a neodymium magnet and a specially-developed voice coil, they handle plenty of power which makes for louder, cleaner sound.
KS-Series Tweeters have always been known for their versatility, and directional installation is the key for best results when enjoying music. With this in mind, KICKER has designed the tweeters to be mounted in one of three ways for optimal sound: flush, surface, or angled. With so many options for your ride, Livin’ Loud® with high-performance KS-Series Tweeters will deliver on a promise of exceptional musical accuracy and matching looks to go with it.
| Model | KS350 |
|
|
|
| Woofer (in., cm) | 3-1/2, 8.9 |
| Tweeter (in., cm) | 1/2, 1.3 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 40/20 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 80-20k |
| Mounting Hole Diameter (in., cm) | 3-3/16, 8.1 |
| Mounting Depth (in., cm) | 1-9/16, 4.0 |
| Grilles | No |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS400 |
|
|
|
| Woofer (in., cm) | 4, 10.0 |
| Tweeter (in., cm) | 1/2, 1.3 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 60/30 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 60-20k |
| Mounting Hole Diameter (in., cm) | 3-11/16, 9.4 |
| Mounting Depth (in., cm) | 1-13/16, 4.6 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS4100 |
|
|
|
| Woofer (in., cm) | 4x10, 10.0x25.0 |
| Tweeter (in., cm) | 1/2, 1.3 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 70/35 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 45-20k |
| Mounting Hole Diameter (in., cm) | 3-7/8x9-5/16, 9.8x23.7 |
| Mounting Depth (in., cm) | 2-7/16, 6.2 |
| Grilles | No |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS460 |
|
|
|
| Woofer (in., cm) | 4x6, 10.0x15.0 |
| Tweeter (in., cm) | 1/2, 1.3 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 60/30 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 50-20k |
| Mounting Hole Diameter (in., cm) | 3-1/2x5-3/4, 8.9x14.6 |
| Mounting Depth (in., cm) | 1-13/16, 4.6 |
| Grilles | No |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS5250 |
|
|
|
| Woofer (in., cm) | 5-1/4, 13.0 |
| Tweeter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 135/45 |
| Sensitivity (dB 1w/1m) | 90 |
| Frequency Response (Hz) | 45-21k |
| Mounting Hole Diameter (in., cm) | 4-9/16, 11.6 |
| Mounting Depth (in., cm) | 2, 5.1 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS600 |
|
|
|
| Woofer (in., cm) | 6, 16.0 |
| Tweeter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 195/65 |
| Sensitivity (dB 1w/1m) | 90 |
| Frequency Response (Hz) | 43-21k |
| Mounting Hole Diameter (in., cm) | 5, 12.7 |
| Mounting Depth (in., cm) | 1-15/16, 4.9 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS650 |
|
|
|
| Woofer (in., cm) | 6-1/2, 16.5 |
| Tweeter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 195/65 |
| Sensitivity (dB 1w/1m) | 90 |
| Frequency Response (Hz) | 40-21k |
| Mounting Hole Diameter (in., cm) | 5-5/8, 14.3 |
| Mounting Depth (in., cm) | 2-1/8, 5.4 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS680 |
|
|
|
| Woofer (in., cm) | 6x8, 16x20.0 |
| Tweeter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 180/60 |
| Sensitivity (dB 1w/1m) | 90 |
| Frequency Response (Hz) | 45-21k |
| Mounting Hole Diameter (in., cm) | 5x7, 12.7x17.8 |
| Mounting Depth (in., cm) | 2-3/8, 6.0 |
| Grilles | No |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS690 |
|
|
|
| Woofer (in., cm) | 6x9, 16x23.0 |
| Tweeter (in., cm) | 1, 2.5 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 270/90 |
| Sensitivity (dB 1w/1m) | 92 |
| Frequency Response (Hz) | 30-21k |
| Mounting Hole Diameter (in., cm) | 6x8-9/16, 15.2x21.7 |
| Mounting Depth (in., cm) | 3-3/16, 8.1 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS6930 |
|
|
|
| Woofer (in., cm) | 6x9, 16x23.0 |
| Mid (in., cm) | 1, 2.5 |
| Tweeter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 300/100 |
| Sensitivity (dB 1w/1m) | 92 |
| Frequency Response (Hz) | 30-21k |
| Mounting Hole Diameter (in., cm) | 6x8-9/16, 15.2x21.7 |
| Mounting Depth (in., cm) | 3-3/16, 8.1 |
| Grilles | Yes |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS650.2 |
|
|
|
| Woofer (in., cm) | 6-1/2, 16.5 |
| Tweeter (in., cm) | 1, 2.5 |
| Max Rec Amp Power (watts PEAK/RMS)* | 150/75 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 35-21k |
| Woofer Hole Diameter (in., cm) | 5-5/8, 14.3 |
| Woofter Mounting Depth (in., cm) | 2-1/8, 5.4 |
| Crossover Point (Hz) | 4.0k |
| Crossover Slope (dB octave) | 12 hi/12 lo |
| Tweeter Attenuation (3Db steps) | 0/+3/+6 |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS60.2 |
|
|
|
| Woofer (in., cm) | 6, 16 |
| Tweeter (in., cm) | 1, 2.5 |
| Max Rec Amp Power (watts PEAK/RMS)* | 150/75 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 35-21k |
| Woofer Hole Diameter (in., cm) | 5, 12.7 |
| Woofter Mounting Depth (in., cm) | 1-15/16, 4.9 |
| Crossover Point (Hz) | 4.0k |
| Crossover Slope (dB octave) | 12 hi/12 lo |
| Tweeter Attenuation (3Db steps) | 0/+3/+6 |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS50.2 |
|
|
|
| Woofer (in., cm) | 5-1/4, 13.0 |
| Tweeter (in., cm) | 1, 2.5 |
| Max Rec Amp Power (watts PEAK/RMS)* | 130/65 |
| Sensitivity (dB 1w/1m) | 88 |
| Frequency Response (Hz) | 38-21k |
| Woofer Hole Diameter (in., cm) | 4-9/16, 11.6 |
| Woofter Mounting Depth (in., cm) | 2, 5.1 |
| Crossover Point (Hz) | 4.0k |
| Crossover Slope (dB octave) | 12 hi/12 lo |
| Tweeter Attenuation (3Db steps) | 0/+3/+6 |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS13 |
|
|
|
| Dome | Kaladex |
| Diameter (in., cm) | 1/2, 1.3 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 150/75 |
| Sensitivity (dB 1w/1m) | 92 |
| Frequency Response (Hz) | 4500-21k |
| Mounting Depth (in., cm) | 9/16, 1.4 |
| Mounting Diameter (in., cm) | 1-9/16, 4 |
| Crossover Point (Hz) | 4.5k |
| Crossover Slope (dB octave) | 12 hi |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS20 |
|
|
|
| Dome | Titanium |
| Diameter (in., cm) | 3/4, 2.0 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 190/95 |
| Sensitivity (dB 1w/1m) | 92 |
| Frequency Response (Hz) | 4500-21k |
| Mounting Depth (in., cm) | 9/16, 1.4 |
| Mounting Diameter (in., cm) | 1-9/16, 4 |
| Crossover Point (Hz) | 4.5k |
| Crossover Slope (dB octave) | 12 hi |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
| Model | KS25 |
|
|
|
| Dome | Aluminum |
| Diameter (in., cm) | 1, 2.5 |
| Impedance (Ohms) | 4 |
| Max Rec Amp Power (watts PEAK/RMS)* | 300/150 |
| Sensitivity (dB 1w/1m) | 94 |
| Frequency Response (Hz) | 4000-20k |
| Mounting Depth (in., cm) | 13/16, 2.1 |
| Mounting Diameter (in., cm) | 1-15/16, 4.9 |
| Crossover Point (Hz) | 4.0k |
| Crossover Slope (dB octave) | 18 hi |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
- Components offer smooth balanced sound with ability to mount tweeter coaxially
- External attenuation switch on component crossover
- Santoprene surrounds
- Ability to fit in factory locations
Comments
The best there is!!!!!!!
Personal, Ithink that the Kickers l7 are the way to go. It has the best bass i ever heard. I got 2 10inch L7 in my 08 chevy silverado and they sound cool.
KS Series In My Truck...
I just installed four KS350's and four KS680's in my 1959 Ford F-100 Panel Truck, one of each in each corner of the vehicle front and rear...awesome, clean sound! I can finally hear my music while going down the freeway with the windows down. Can't wait for the custom sub cabinets to get built and install them too!
ks650
putting two sets of these in my jeep pushed by the 350.4 sounds way better than the JL speakers, JL's sound like tin. These are smooth and clear.
KS650.2
Can't say enough good things about the Kicker speakers. I have these amped. They are extremely clear.
kicker ks 602_2 6 1/2 components
these things have really good vocals mids and highs. i have them on the 08zx350.4 and they sound really good.