OVERVIEW
LOCAL PRODUCT SEARCH
SPECIFICATIONS
SUPPORTDS-Series 4" Coaxial
The 2014 DS Four-Inch Speakers are a great way to upgrade the sound in your ride.
Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A st amped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVC™ (Extended Voice Coil) technology, for the best sonic quality. Add a DX amplifier to increase the level and quality of the volume in your ride.
These DS speakers work best with 30 watts of recommended power. See below for more details.
| Speaker Design |
| 2 - way |
| Woofer [in, mm] |
| 4, 100 |
| Tweeter [in, mm] |
| 1/2, 13 |
| Rated Impedance [Ω] |
| 4 |
| Peak Power Handling [Watts] |
| 120 |
| Continuous Power Handling [Watts RMS] |
| 30 |
| Sensitivity [1W, 1m] |
| 88 |
| Frequency Response [Hz] |
| 60-20k |
| Mounting Hole Diameter [in, mm] |
| 3-3/4, 95 |
| Top Mount Depth [in, mm] |
| 1/4, 6 |
| Bottom Mount Depth [in, mm] |
| 1-13/16, 46 |
| Tweeter Protrusion [in, mm] |
| 0 |
| Grilles |
| Yes |
| Tweeter Magnet Material |
| Neodymium |
| Tweeter Dome Materia |
| PEI (polyether imide) |
| Tweeter Design |
| Balanced dome |
| Woofer Cone Material |
| Polypropylene |
| Woofer Surround Material |
| Polyester foam |
*Power handling assumes typical music program with minimal clipping. See your KICKER dealer for complete details. Based on measurements of 4Ω models.
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com