HLCD Tower System front
HLCD Tower System side
HLCD Tower System three-quarter
HLCD Tower System back
enlarge front
enlarge side
enlarge three-quarter
enlarge back
KMFC11 HLCD Tower System
with flat, 2.5-inch bolt mounting
KMFC Horn-Loaded Tower Systems deliver great looks and incredible sound quality, and now you can use them with mounts made for standard, flat factory tower-speaker hardpoints with 2.5-inch bolt spacing and hidden wires. Your tunes are loud and clear, whether you’re in the boat, at the party cove or on the end of a tow rope.

EASY MOUNT & MORE

KICKER gear is made for marine use. Injection-molded woofer cones are made of UV-treated polypropylene with Santoprene® surrounds, providing excellent durability in any weather. Even our enclosures are next level, integrating a UV-resistant inhibitor to prevent fading or discoloring over years of use. All of our HLCD (horn-loaded compression-driver) Systems meet or exceed ASTM standards for humidity** and UV exposure*** and come with mounting hardware forged from rustproof, 316L stainless-steel.

Watch the LEDs light up the night in any one of seven colors, or upgrade to 20 colors and 19 lighting modes with the wireless KMLC LED remote controller (sold separately). Don’t just be the life of the party - be the reason for it.

BUILT RIGHT

  • Mounts to Flat Factory Tower-Speaker Hardpoints with 2.5-inch Bolt Spacing and Hidden Wires
  • Four-Ohm Voice Coil
  • High-Frequency Horn Design with Titanium-Dome Compression Drivers
  • Stitched Polypropylene Cone with Santoprene Surround
  • UV-Resistant Polymer Basket
  • 316L Stainless Mounting Hardware Included
  • Seven Color LED Grilles Included*
  • Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***

*Upgradable to 20 Colors and 19 Lighting Modes with KMLC.

**ASTM G154 400 hr. Accelerated UV Test

***ASTM B117 200 hr. Salt Fog Test

The KMFC 11" Tower System works best with 300 watts of recommended power.

The logo on the back is adjustable.

Adjustable Logo

On all KMFC, KMTC and KMTE products the logo is manually adjustable to 180 degrees.

Specifications
Woofer (in, cm)
11, 28
Horn Loaded Compression Driver (in, cm)
1.4, 3.5
Dome Material
Titanium
Rated Impedance (ohms)
4
Peak Power (watts, per ANSI/CTA-2031-A)
600
Recommended Amplifier Power (watts RMS)
150-300
Sensitivity (1W, 1m)
93
Frequency Response (Hz)
20-20k
LED Lighting
Yes
What's in the Box:
2 loaded enclosures
2 vehicle mounting brackets
1 hardware pack, with anti-seize compound
2 vehicle wiring harness pigtails
2 grille mounted Kicker badges(loose in poly bag)
1 CIC or install manual
Warranty
When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase. - Complete warranty information here.
Support

Manuals


Customer Information Card | Download

Mount Guide | Download

Contact Support


Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com

Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com

since 1973

© , Stillwater Designs. All rights reserved. Copyright and Trademark Notice.

We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you've provided to them or that they've collected from your use of their services. You consent to our cookies if you continue to use this website. Check out our Privacy Policy.