12" CompVX 4 Ohm
A cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire, so when you run hundreds of watts to this sub, it gives you loud, distortion-free bass.
Want setup help? Go to KICKERU for a free woofer & amplifier configuration app!
*The CompVX 12-Inch Subwoofer works best with a sealed or ported enclosure and 750 watts of recommended power. See below for more details.
|44CVX124 T/S Parameters|
|Recommended Amplifier Power (watts RMS)|
|Peak Power (watts, per ANSI/CTA-2031-A)|
|Sensitivity (dB 1w/1m)|
|Frequency Response (Hz)|
|Mounting Depth (in, cm)|
|Mounting Cutout (in, cm)|
|Min Sealed Box Vol (cu. ft, L)|
|Max Sealed Box Vol (cu. ft, L)|
|Min Vented Box Vol (cu. ft, L)|
|Max Vented Box Vol (cu. ft, L)|
|What's in the box?|
|one 12-inch subwoofer, one owner's manual, two stickers|
|When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase. - Complete warranty information here.|
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
8am - 5pm CST
8am - 5pm CST
© , Stillwater Designs. All rights reserved. Copyright and Trademark Notice.