The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."
KXMA400.2 Marine Amplifier
KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center.
Want setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KXMA amplifier delivers as much as 200 watts into two full-range channels, or 400 watts into one bridged channel. See below for more details.
|POWER [watts/ch], 2 OHM STEREO|
|200 x 2|
|POWER [watts/ch], 4 OHM STEREO:|
|100 x 2|
|POWER [watts/ch], 4 OHM BRIDGED MONO:|
|400 x 1|
|DYNAMIC POWER [watts]:|
|DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L|
|DIMENSIONS [cm] all models 5.4H x 21.0W x ___L|
|FREQUENCY RESPONSE [Hz]|
|High Level 250mV-10V, Low Level 125mV-5V|
|>95dB, a-weighted, re: rated power|
|24dB/octave, Off/variable high pass
10-500Hz, variable low pass
40-500Hz (400-5kHz w/ 10x switch),
band pass capable
|Variable 0-6dB, centered @ 40Hz|
|COMES WITH WIRED REMOTE|
RMS Power test @ 14.4v @ </- 1% THD+N, Audio Precision® APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Dynamic Power test @ 14.4v @ </- 10% THD+N, Audio Precision APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Audio Precision is a registered trademark of Audio Precision in the United States and other countries.
Important Safety Information
When installing KICKER amplifiers (car or marine) in a boat or other vehicle/environment where flammable fuel vapors can accumulate rather than dissipate, you must use appropriate MARINE fuses, MARINE fuse holders, and MARINE wiring to minimize the risk of fire or explosion.