The KXMA 800-watt, eight-channel amplifier is one of the most flexible marine power pieces available today.
Real Marine™
The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."
KXMA800.8 Marine Amplifier
Gain, crossover and bass-boost conrols are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection.
- Class D Amplifier
- Gain Control With "Gain Match" LED Indicator
- FIT2™ (Fail-safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ™ 6dB Variable Bass Boost
- ABYC/NMMA-Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted, Teal LED Light Pipe
- Stainless-Steel Mounting Hardware Included
Want setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KXMA amplifier delivers as much as 100 watts into eight full-range channels, or 200 watts into four sets of bridged channels. See below for more details.
| POWER [watts/ch], 2 OHM STEREO |
| 100 x 8 |
| POWER [watts/ch], 4 OHM STEREO |
| 50 x 8 |
| POWER [watts/ch], 4 OHM BRIDGED MONO: |
| 200 x 4 |
| DYNAMIC POWER [watts]: |
| 1200 |
| DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L |
| 14-3/4 |
| DIMENSIONS [cm] all models 5.4H x 21.0W x ___L |
| 37.4 |
| FREQUENCY RESPONSE [Hz] |
| 10-20k, +0/-1dB |
| INPUT SENSITIVITY |
| High Level 250mV-10V, Low Level 125mV-5V |
| SIGNAL-TO-NOISE RATIO |
| >95dB, a-weighted, re: rated power |
| ACTIVE CROSSOVER |
| (amp 1 and amp 2) 24dB/octave, Off/ HP/LP, variable 10-5kHz w/ 10x switch
(amp 3 and amp 4) 24dB/octave, Off/ HP/LP/BP, variable HP 10–500Hz; variable LP, 40–5kHz w/ 10x switch |
| KickEQ™ BOOST |
| Variable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4) |
| COMES WITH WIRED REMOTE |
| No |
| Warranty |
| When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase. - Complete warranty information here. |
RMS Power test @ 14.4v @ </- 1% THD+N, Audio Precision® APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Dynamic Power test @ 14.4v @ </- 10% THD+N, Audio Precision APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Audio Precision is a registered trademark of Audio Precision in the United States and other countries.
Important Safety Information
When installing KICKER amplifiers (car or marine) in a boat or other vehicle/environment where flammable fuel vapors can accumulate rather than dissipate, you must use appropriate MARINE fuses, MARINE fuse holders, and MARINE wiring to minimize the risk of fire or explosion.
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com
