THREE ZONES OF FUN
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump on the Amp 3 channels. Powering as many as 12 speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
Want setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KM-Series amplifier delivers 100 watts into six channels, or 200 watts bridged into three channels. See below for more details.
|POWER [watts/ch], 2 OHM STEREO|
|100 x 6|
|POWER [watts/ch], 4 OHM STEREO|
|50 x 6|
|POWER [watts/ch], 4 OHM BRIDGED MONO|
|200 x 3|
|DYNAMIC POWER [watts]|
|Dimensions [in] all models 2-5/16H x 7-1/8W x ___L|
|Dimensions [cm] all models 5.9H x 18.0W x ___L|
|FREQUENCY RESPONSE [Hz]|
|High Level 250mV-10V|
Low Level 125mV-5V
|>95dB, a-weighted, re: rated power|
|(amp 1 and amp 2) 12dB/octave, variable 0-200Hz, HP only; (amp 3) 12dB/octave, variable 50-200Hz, Off/HP/LP|
|(amp 3 only) 24dB/octave, high pass fixed @ 25Hz|
|(amp 3 only) Variable 0-6dB, centered @ 40Hz|
RMS Power test @ 14.4v @ </- 1% THD+N, Audio Precision® APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Dynamic Power test @ 14.4v @ </- 10% THD+N, Audio Precision APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Audio Precision is a registered trademark of Audio Precision in the United States and other countries.
Important Safety Information
When installing KICKER amplifiers (car or marine) in a boat or other vehicle/environment where flammable fuel vapors can accumulate rather than dissipate, you must use appropriate MARINE fuses, MARINE fuse holders, and MARINE wiring to minimize the risk of fire or explosion.