10" CompVX 2 Ohm
Inside the sub, the poly-cotton, semi-progressive-roll spider supplies substantial stability for the loudest bass possible. Externally, a ribbed Santoprene® surround protects the cone during max excursion.
Features:
- Dual Two-Ohm Voice Coils
- Thick Polypropylene Cone
- Signature Double Blue Surround Stitching
- Ribbed Santoprene® Surround
- SoloKon™ Cone Reinforcement
- Oversized Suspension System
- High-Strength Insulated Tinsel Leads
- High Temp Voice Coil
- Perimeter Venting for Thermal Management
- Massive Ceramic Magnet
- UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
- Cast Aluminum Basket
- Satin Nickel Spring-Loaded Speaker Terminals
Want setup help? Go to KICKERU for a free woofer & amplifier configuration app!
*The CompVX 10-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power. See below for more details.
| Size (IN.,CM) |
| 10, 25 |
| Impedance (OHMS) |
| 2 DVC |
| Max Rec Amplifier Power (WATTS PEAK/RMS)* |
| 1200/600 |
| Sensitivity (dB 1w/1m) |
| 85.7 |
| Frequency Response (Hz) |
| 24-500 |
| Mounting Depth (in, cm) |
| 5-15/16, 15.1 |
| Mounting Cutout (in, cm) |
| 9-3/16, 23.3 |
| Min Sealed Box Vol (cu. ft, L) |
| .8, 22.7 |
| Max Sealed Box Vol (cu. ft, L) |
| 3.0, 85.0 |
| Min Vented Box Vol (cu. ft, L) |
| 1.25, 35.4 |
| Max Vented Box Vol (cu. ft, L) |
| 1.75, 49.6 |
| What's in the box? |
| one 10-inch subwoofer, one owner's manual, two stickers |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com
