12" CompVR 4 Ohm
The CompVR 12-Inch Subwoofer is a 4Ω dual voice coil design, built for easy wiring.
CompVR creates your bass using high-temp, dual voice coils. A ribbed Santoprene surround also gives the cone added strength under stress. The perimeter venting, Spiralead™ tinsel-lead technology, and spring-loaded push terminals are part of the high-performance engineering standards found on every KICKER woofer.
The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
|43CVR124 T/S Parameters|
|Product Dimension Sheet|
|SIZE [in, cm]:|
|Recommended Amplifier Power (watts RMS)|
|Peak Power (watts, per ANSI/CTA-2031-A)|
|SENSITIVITY [dB 1w/1m]:|
|MOUNTING DEPTH [in, cm]:|
|MOUNTING DIAMETER [in, cm]:|
|MIN SEALED BOX VOL [cu. ft, L]:|
|MAX SEALED BOX VOL [cu. ft, L]:|
|MIN VENTED BOX VOL [cu. ft, L]:|
|MAX VENTED BOX VOL [cu. ft, L]:|
|When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEARS from date of original purchase. - Complete warranty information here.|
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
8am - 5pm CST
8am - 5pm CST
© , Stillwater Designs. All rights reserved. Copyright and Trademark Notice.