KXA400.4 Amplifier
This KX 400-watt four channel amplifier is built to easily power your door speakers or be a full system solution. FIT2™ (Fail-Safe Integration Technology) ensures your amp works with nearly any stock or aftermarket radio.
Features:
Want setup help? Go to KICKER U for a woofer & amplifier configuration app!
This KX amplifier delivers as much as 100 watts per channel (4 channels driven), or 200 watts into two sets of bridged channels. See below for more details.
RMS Power [Watts] |
@ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4 @ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4 @ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2 |
Length [in, cm] |
11-3⁄16 , 28.4 |
Height [in, cm] |
2-⅛, 5.5 |
Width [in, cm] |
8-5⁄16 , 21 |
Frequency Response [Hz] |
10Hz–20kHz |
Input Sensitivity: |
250mV–10V |
Signal-to-Noise Ratio |
95dB |
Selectable Electronic Crossover |
Amp 1: OFF/HP/LP; Variable 10–5,000Hz with X10 switch Amp 2: OFF/HP/LP/BP; Variable HP, 10–500Hz; Variable LP, 40–5,000Hz with 10X switch Slope: 24dB/octave |
KickEQ™ Bass Boost |
0-18dB @ 40Hz | CEA Power |
50 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
CEA Signal-to-Noise Ratio |
-75dB CEA-2006B (ref: 1W, A-weighted) |
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com