The KXM 800-watt five-channel amplifier is a full system in a single package. KickEQ+™ delivers an enormous 18dB of variable bass boost while a powerful 24dB crossover lets you quickly tune and tweak your sound. A revolutionary illuminated clip indicator is built right into the gain knob to get the most power without distorting the signal.
A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver's seat!
Want setup help? Go to KICKER U for a free woofer & amplifier configuration app!
This KXM amplifier delivers as much as 100 watts into four full range channels, or 200 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts. See below for more details.
|RMS Power [Watts]|
|@ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4|
@ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4
@ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2
|Sub Channel RMS Power [Watts]|
| @ 14.4V, 4Ω mono, ≤ 1.5% THD+N: 200 x 1|
@ 14.4V, 2Ω mono, ≤ 1.5% THD+N: 400 x 1
@ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10%
|Length [in, cm]|
|Height [in, cm]|
|Width [in, cm]|
|Frequency Response [Hz]|
|AMPS 1 - 2: 10Hz–20kHz|
|Signal-to-Noise Ratio [dB]|
|Selectable Electronic Crossover|
|AMP 1: OFF/HP/LP, variable 10–5,000Hz with 10X switch;|
AMP 2: OFF/HP/LP/BP, variable HP 10–5,00Hz,
variable LP 40–5,000Hz with 10X switch; 24dB/octave
SUB: Variable LP 40–160Hz; 24dB/octave
|(amp1) 24dB/octave, variable 10-500Hz, selectable high pass, low pass or all pass, w/10x switch; (amp2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-500Hz, selectable high pass, low pass, all pass or band pass, w/10x switch for lo pass; (KX.5 sub channel) 24dB/octave, variable 40-160Hz, low pass only|
|Variable 10–80Hz, 24dB/octave|
|KickEQ+™ Parametric Bass Boost|
(Remote Control Adjustable)
|Boost - Variable 0-18db|
|50W x 4 @ 4 ohms (10Hz–20,000Hz)|
200W x 1 @ 4 ohms (40Hz–160Hz)
|CEA Signal-to-Noise Ratio|
|-75dB CEA-2006B (ref: 1W, A-weighted)|