15" SoloXS L7XS 1 Ohm Recone Kit
The Recone Assembly consists of a pre-assembled cone, surround, and voice coil that will be bolted into the L7XS motor and Basket Assembly, assuring perfect cone and voice-coil alignment.
Because there is no glue utilized in the recone process, the cone can be replaced in minutes should failure occur in the field. Alignment pins are included.
*The L7XS-Series supports re-coning with ANY IMPEDANCE of L7XS Recone Kit. For example, if you purchased an L7XS with 1-Ohm dual voice coils, you may re-cone using a 2-Ohm L7XS kit.
model: 52L7XS151RK
Because there is no glue utilized in the recone process, the cone can be replaced in minutes should failure occur in the field. Alignment pins are included.
*The L7XS-Series supports re-coning with ANY IMPEDANCE of L7XS Recone Kit. For example, if you purchased an L7XS with 1-Ohm dual voice coils, you may re-cone using a 2-Ohm L7XS kit.
model: 52L7XS151RK
What's in the Box?
| Description | Qty. |
|---|---|
| L7XS Cone Assembly | 1 |
| Terminal Set Screw | 8 |
| Front Gasket Screw | 16 |
| Spider Landing Screw with Thread Locker | 12 |
| Coil Alignment Pin Pack 8 pins in the L7XS12/15RK; 10 pins in the L7XS18RK | 1 |
| L7XSd1 Decal Sheet | 1 |
Support
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com