12" SoloXS L7XS 1 Ohm
Are you ready for KICKER's pinnacle subwoofer line? It just keeps getting bigger and badder!
model: 52L7XS121
model: 52L7XS121
Incomparable
SoloXS always promises high-excursion design, made for ultra-deep bass at very high volume. It’s developed like no other KICKER subwoofer.
Features:
- Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and forget the glue
- KICKER exclusive Forced Air Cooling™
- Three-inch (12" and 15") and four-inch (18") aluminum voice-coil former
- Extra-large dual-spider suspension
- Double-pressed pulp cone
- Next-gen surround made from proprietary NBR material
- Custom rubber boot for oversized ferrite magnet
- Max-cooling, cast-aluminum basket
- Single 8 AWG push terminal and dual 4 AWG terminal block
- Dual tinsel leads with considerably more strands than L7X
*SoloXS12" shown in diagram.
Specifications
| L7XS.DXF - for subwoofer hole cutouts |
| 3D Printing Software |
| L7XS.SLDPRT - 3D-printing of grille spacers |
| Size (in, cm) |
| 12, 30 |
| Rated Impedance (Ohms) |
| 1 DVC |
| Rec Amp Power RMS |
| 1500-3000 |
| Frequency Response |
| 20-100 |
| Magnet Diameter (in, cm) |
| 9.85, 25 |
| Total Magnet Weight (oz, kg) |
| 705, 20 |
| Voice Coil Diameter (in, mm) |
| 3, 75 |
| Voice Coil Winding Width (in, mm) |
| 3.4, 86.2 |
| Product Dimension Sheet |
| 52L7XS121 Dimensions |
| Top Plate Thickness (in, mm) |
| 0.8, 20 |
| Xmax (in, mm) |
| 1.71, 43.1 |
| Mounting Cutout (in, cm) |
| 11-1/16, 28.1 |
| Mounting Depth (in, cm) |
| 10-1/8, 25.7 |
| Recommended Vented Box Volume (Cu. Ft., L) |
| 3, 84.9 |
| Port Opening (in x in, cm x cm) |
| 3.5 x 13, 9 x 33 |
| Port Length (in, cm) |
| 36.5, 93 |
| Vented Enclosure Tuning Frequency (Hz) |
| 31 |
| Warranty |
| When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this SOLO XS product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase. - Complete warranty information here. |
*Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
**Port Volume Excluded.
Due to continual development, product and specifications are subject to change without notice. Stillwater Designs and its agents are not responsible for typographical errors.
Support
Contact Support
Technical Support
(405) 624-8583
8am - 5pm CST
support@kicker.com
Warranty Support
(405) 624-8510
8am - 5pm CST
warranty@kicker.com